RPA plate lifting insert system are lifting inserts consisting of flat steel insert welded to a flat steel plate and used with rapid release lifting keys. These lifting inserts are anchored to concrete with anchor reinforcement. RPA plate lifting inserts are suitable for lifting of slabs, plates, tubes and other thin pre-cast concrete RPA plate lifting inserts are available in two materials. Standard delivery surface finish is black (uncoated). RPA plate lifting inserts are available also from stainless steel.
Approvals
- Russia: РОСС ЕЕ. АГ81.Н02745 (For RPA 16)
- CE Approval
Dimensions Resistance of RPA Plate Lifting Anchor
Safe Working Loads (SWL) [kN] | |||||||||
Plate Lifting Anchor |
H [mm] |
B [mm] |
D [mm] |
T [mm] |
t [mm] |
A [mm] |
C [mm] |
ß = 0° - 15° | ß = 15° - 45° |
---|---|---|---|---|---|---|---|---|---|
RPA 1.4 | 55 | 30 | 14 | 6 | 8 | 80 | 10 | 14 | 14 |
RPA 2.5 | 80 | 10 | 8 | 80 | 25 | 25 | |||
RPA 5.0 | 120 | 40 | 18 | 15 | 10 | 100 | 10 | 50 | 50 |
RPA 10.0 | 160 | 60 | 26 | 20 | 12 | 140 | 15 | 100 | 100 |
RPA Plate Lifting Anchor Materials and Standards
Lifting Insert Type and Size | Material | Standard | Type |
---|---|---|---|
RPA 5.0 | S355J2 | EN 10025 | Uncoated |
RPAR 5.0 | 1.4571 | EN 10088 | Stainless steel |
Share on :