R-STEEL® offers a comprehensive range of high quality lifting systems designed for safe lifting and transportation of various types of precast elements. Your selection may be based upon technical or economic requirement or due to already owned/available lifting equipment.
R-STEEL® lifting systems are divided into four types:
– Threaded Lifting Systems
– Spherical Head Lifting Systems
– Quick Lock Lifting Systems
– Cast In-Loop and other Lifting Systems
R Lifting Anchor
The R lifting anchors manufactured by R-Group are lifting anchors designed for lifting of concrete elements.
RLS (Crosshole) Lifting Anchor
RLS inserts are inner threaded inserts designed for lifting of concrete elements. They are installed in the concrete elements before casting….
RTA (Tail) Lifting Anchors
RTA, RWTL and RWTS lifting anchors manufactured by R-Group are lifting anchors designed for lifting of concrete elements.
RWTL (Long Wavy Tail) Lifting Anchor
RTA, RWTL and RWTS lifting anchors manufactured by R-Group are lifting anchors designed for lifting of concrete elements.
RWTS (Short Wavy Tail) Lifting Anchor
RTA, RWTL and RWTS lifting anchors manufactured by R-Group are lifting anchors designed for lifting of concrete elements.
RPAS (Plate) Lifting Anchor
RPAS plate lifting anchors consist of steel tube with inner thread welded to a flat steel plate and used with threaded lifting keys.
RSA (Square) Lifting Anchor
The RSA square lifting anchor is used in façade panels for transport or in dowel connections.
RCF (Crown Foot) Lifting Anchor
RCF lifting anchor is suitable for lifting the light weight flat units.
Wire Rope Lifting Device
If the lifting angle α (see picture 2) is greater than 45°, a lifting device equipped with a pressure plate must always be used.
Wire Rope Lifting Device with Pressure Plate
If the lifting angle α (see picture 2) is greater than 45°, a lifting device equipped with a pressure plate must always be used.
Full Metallic Lifting Device Equipped with Pressure plate
If the lifting angle α (see picture 2) is greater than 45°, a lifting device equipped with a pressure plate must always be used.
RNP Plastic Nailing Plate
The nailing plate is used to fix the lifting anchors to the formwork. The nailing plate is made of plastic and is color coded according to the thread size…
RMR Marking Ring
Provides an economical method for additional reinforcement to be fixed to the RSTEEL® Lifting Insert. Color coded rings provides
RLA Lifting Anchor
RLA lifting anchors are studded steel parts used in lifting of concrete elements.
RLEA Lifting Anchor
The RSTEEL® RLEA anchor with cross hole is developed for installation on the ends of wall stabs. The anchor is held fast via the anchorage rod which is inserted through the cross hole.
RLAB (Angle Bent) Lifting Anchor
Available for sale in specific markets only. For more details, please contact your RSTEEL® Area Sales Manager
RLDH (Double Headed) Lifting Anchor
Available for sale in specific markets only. For more details, please contact your RSTEEL® Area Sales Manager
RLFP (Flat Plate) Lifting Anchor
Available for sale in specific markets only. For more details, please contact your RSTEEL® Area Sales Manager
RLRA (Rod) Anchor
Available for sale in specific markets only. For more details, please contact your RSTEEL® Area Sales Manager (RLRA, RLRAB)
RLRAB (Rod Bend) Anchor
Available for sale in specific markets only. For more details, please contact your RSTEEL® Area Sales Manager (RLRA, RLRAB)
3D Lifting SH Clutch
3D Lifting SH clutch can be used with spherical head lifting anchors. The 3D Lifting SH clutch is made of high quality steel and they are
Caliber - 3D Lifting System Maintenance
In common with all lifting devices, the lifting system SH, SHR must be checked at least twice a year by trained personnel. Any defects found should be corrected before use.
RRRF Rubber Recess Formers
The colour coded round rubber recess formers are produced from oil and temperature resistant rubber and can be reused…
RORF Oval Rubber Formers
The oval shaped, narrow recess formers because of its minimal width are used for thin elements such as wall panels….
RSRF Round Steel Recess Former
Solid metal formers have a thread fitted in the back to fix to the mould.
Grommet
The colour coded round rubber recess formers are produced from oil and temperature resistant rubber and can be reused….
REA (Erection) Anchor
REA lifting inserts systems manufactured by R-Group Finland Oy are lifting anchors consisting of flat steel inserts, ribbed steel anchor bars and rapid release lifting keys.
RHA (Two Hole) Anchor
RHA lifting inserts systems manufactured by R-Group Finland Oy are lifting anchors consisting of flat steel inserts, ribbed steel anchor bars and rapid release lifting keys.
RCL Lifting Anchor
RCL lifting anchors are flat steel parts with ribbed steel bar for anchoring. Main usage of RCL lifting parts is lifting of one storey high balcony columns.
RPA (Plate) Lifting Anchor
RPA plate lifting insert system are lifting inserts consisting of flat steel insert welded to a flat steel plate and used with rapid release lifting keys.
RSEA (Erection) Lifting Anchor
Available for sale in specific markets only. For more details, please contact your RSTEEL® Area Sales Manager
RFA (Flat Foot) Lifting Anchor
Available for sale in specific markets only. For more details, please contact your RSTEEL® Area Sales Manager (RFA)
RHEA (Erection) Lifting Anchor
Available for sale in specific markets only. For more details, please contact your RSTEEL® Area Sales Manager (RFA, RHEA)
RUA (Universal Erection) Lifting Anchor
Available for sale in specific markets only. For more details, please contact your RSTEEL® Area Sales Manager
Quick Lift Ring Clutch
The lifting clutch is made of special steel casting. The lifting bolt of the quick lift clutch is inserted into the hole of the lifting insert…
RRFB Rubber Recess Former Bayonet
The lifting clutch is made of special steel casting. The lifting bolt of the quick lift clutch is inserted into the hole of the lifting insert and can be easily and quickly removed after lifting.
RPFB Plastic Recess Former Bayonet
The lifting clutch is made of special steel casting. The lifting bolt of the quick lift clutch is inserted into the hole of the lifting insert and can be easily and quickly removed after lifting.
RNA lifting loop
RNA lifting loops are designed for the lifting of walls. They can also be used for lifting of columns and beams with appropriate bending. These are also available in stainless steel…
RNB lifting loop
RNB lifting loops are designed for lifting of walls. They can also be used for lifting of columns and beams with appropriate bending. These are also available in stainless steel…
RNE lifting loop
RNE lifting loops are lifting loops designed for lifting of sandwich walls….
RNER lifting loop
RNER lifting loops are designed for lifting of sandwich walls. RNER lifting loops are made of stainless steel….
RWRA Lifting System
RWRA Wire Rope Cast in Lifting Loops are one of the most economic lifting systems designed for lifting precast concrete units where the lifting points will