RVT Inserts are bent inner thread sockets installed to concrete before casting. Anchoring to concrete is with compression between concrete and the bend at the bottom of the insert. The product has been designed for concrete C16/20 and C25/30
Dimensions and Tolerances of the RVT Insert
| Insert Size | M (mm) 1 |
L (mm) ±1 |
ØD (mm) ±0.1 |
e (mm) ±1 |
a (mm) ±1 |
b (mm) ±1 |
ØD1 (mm) ±0.1 |
|---|---|---|---|---|---|---|---|
| RVT M 8x50 | 8 | 50 | 11 | 8 | 20 | 15 | 8.6 |
| RVT M 10x45 | 10 | 45 | 13 | 13 | 25 | 18 | 8.6 |
| RVT M 10x60 | 10 | 60 | 13 | 13 | 25 | 18 | 8.6 |
| RVT M 12x45 | 12 | 45 | 16 | 14 | 25 | 23 | 10.4 |
| RVT M 12x50 | 12 | 50 | 16 | 14 | 25 | 23 | 10.4 |
| RVT M 12x70 | 12 | 70 | 16 | 24 | 30 | 23 | 10.4 |
| RVT M 16x60 | 16 | 60 | 22 | 19 | 30 | 31 | 14.2 |
| RVT M 16x100 | 16 | 100 | 22 | 19 | 35 | 31 | 14.2 |
| RVT M 20x80 | 20 | 80 | 27 | 24 | 30 | 38 | 17.7 |
| RVT M 20x100 | 20 | 100 | 27 | 24 | 35 | 38 | 17.7 |
| RVT M 24x100 | 24 | 100 | 32 | 28 | 30 | 45 | 21.3 |
* Thread tolerance 6H (metric thread)
For resistances, please refer to the
technical manual.
RVT Inserts Materials and Standards
| Ordering code | Insert | Standard | Type |
|---|---|---|---|
| RVT | S235JR+AR | SFS-EN 10025 | Electro zinced yellow passivated |
| RVTr | 1.4301 | SFS-EN 10088 | Stainless |
| RVTh | 1.4401 | SFS-EN 10088 | Acid resistant |
Share on :